2013 Scion FR-S Base
Riken Mesh 16x8 16
Accelera 651 195/50
Godspeed Project Coilovers
|Riken Mesh - Custom|
Suspension Brand: Godspeed Project
Suspension Details: Godspeed mono ss coilovers. Perrin f & r endlinks. Spc rear lca’s 2.5 f 2.0 rear not sure height or if you’re asking from the ground to frame rails
Rubbing: No rubbing or scrubbing
Trimming: Fenders Rolled
Front Wheel Spacers: 1" See Pricing
Rear Wheel Spacers: 0.75" See Pricing
Details: Borla yep header, tomei overpipe, cnt catted front pipe, tomei 80r Single exit titanium cat back. Trd drop in filter. Open source tune. Nrg tilt hub. Nardi deep corn steering wheel. Bride low max driver seat. Gt86 speedfactory short shifter. Perrin shifter bushing. Stop tech slotted rotors. Stop tech pads stop and stop tech ss brake lines.
Do 16x8 16 wheels with 195/50 tires fit on a 2013 Scion FR-S RWD Godspeed Project Coilovers?
Yes they do! This 2013 Scion FR-S RWD is running Riken Mesh 16x8 16 wheels Accelera 651 195/50 tires with Godspeed Project Coilovers suspension, needs Fenders Rolled and has No rubbing or scrubbing. As you can see from the pics this wheel and tire combo can be done!** With this year/make/model, the stance is Flush. Also remember spacers impact fitment, this ride is running 1" in front and 0.75" in rear.
** We always recommend finding a couple vehicles that have achieved this fitment, as this information is solely based on the owner of this vehicle. Although we review every gallery page, there are so many variables we cannot verify every fitment is possible or accurate. However, if all the other kids are doing it, IT MUST FIT!!
All gallery pages and information are added by the owners, or representatives of the owners of the vehicles. Custom Offsets LLC is not responsible or liable for the information posted on this site. Use at your own risk and always find multiple sources to confirm your wheel, tire, and suspension kit buying decision. 1 views.