Blogs at Fitment Industries

If you've got a high-performance car in your driveway that you want to get even more power out of, but you don't have much experience making engine mods and want something easy you can do, what are your options? They're admittedly limited, but you can't go wrong with a good cold air intake. Cold air intakes are some of the most common aftermarket performance mods that enthusiasts make to their cars, and they're also one of the easiest to install. So, let's install one - we'll take you through a step-by-step process today so you know exactly what you're doing when you get your intake installed in your engine. Let's get started! Table Of Contents -Parts and Materials Needed to Install a Cold Air Intake -Step By Step Process For Installing a Cold Air Intake System -Shop Online For Aftermarket Cold Air Intake Kits Parts and Materials Needed to Install a Cold Air Intake You don't need a whole lot to get an intake installed, and most of the parts required will be things you probably already have. Before you get your intake out of the box and start the installation process, make sure you have the following items: Flathead & Phillips screwdrivers Allen or Hex Wrench Set Pliers Sockets Ratchet wrench There are plenty of moving parts that you'll need to keep an eye on whenever you work on an engine, so you'll also want to make sure that wherever you're working, there's plenty of light. If you're in your garage, a good shop light should do the trick. Read More: What Are The Best Car Mods To Improve Fuel Efficiency? Step By Step Process For Installing a Cold Air Intake System Now that you've got all the parts needed to install your cold air intake, let's get it into your engine! The step-by-step process for doing so is below: Disconnect the negative battery terminal from your car - not only is this done for cautionary purposes, but disconnecting a battery resets the PCM to your engine, allowing it to learn the new air to fuel ratio that your cold air intake will generate. Unscrew the hose clamp from the factory air tube and slip it off the throttle body. Remove the rest of the factory intake system as well. Attach the new intake's silicone coupling to the throttle body on your engine. Tighten the hose clamp at the end of the coupling to secure it in place. Put another hose clamp on the front of the coupling - don't tighten it yet, though. That'll come later. The intake tube should slide right into the silicone coupling - you just need to make sure that it's running from the throttle bay away from where the engine bay is. Tighten up the silicone coupling and make sure all other brackets on the tube are secured. Your new intake system will come with a mass air flow sensor. Plug it in. Reconnect your battery's negative terminal so it has the chance to reset and read the new system. That's it! You're good to go, and you should start to see some performance boosts immediately. However, keep in mind that these steps may vary depending on the kind of car you drive, and if you need to install an airbox to go with your intake, some additional installation time will also be needed. Installing a cold air intake is so easy you could do it with a Swiss Army knife. We know this because we did - check out the video here! Shop Online For Aftermarket Cold Air Intake Kits At Fitment Industries Hey, just checking in to pay the bills - now that we've told you how to install a cold air intake, if you haven't gotten one already, you really should. And our performance store is full of new intake systems from the best brands in the business! Check it out today and find the intake that fits your make and model - financing and free shipping are available on all performance parts we offer. Of course, if you need help finding the right parts for your car, give us a shout at 920-363-6060 - we're happy to get you set up with the intake system that'll give you all the performance upgrades you want.

Blogs at Fitment Industries

The PRL Motorsports Upgrades Civic Owners Can't Stop Running

September 15, 2025

What Do Cold Air Intake Systems Do For Car Performance?

July 13, 2022

How To Install A Cold Air Intake On Your Car Engine

July 11, 2022